ARTA Garaiya (TB-03)
Item No：58409
Length: 435mm Image shows assembled and painted model kit
| 【 Charismatic GT300 Racer 】 Based on the 2-seater Garaiya sports car developed by the Autobacs sports car research center, the ARTA Garaiya was produced by apr for entry into the GT300 class of the Super GT Championship in 2007. Featuring a mid-mounted 3.5 liter naturally-aspirated V6 engine and a low, aerodynamic body, its capability was unquestioned. With M.Nitta and S.Takagi at the helm, the team took 1st place at Round 3 Fuji Speedway, and were in the running for the championship until the last race of the season. Tamiya's R/C assembly kit accurately reproduces the distinctive form of this sleek race car and mounts it on a new shaft-driven 4WD chassis. |
| 【 Born for the Circuit - TB-03 】 Equipped with many race-use parts as standard, the TB-03 also features a longitudinally-mounted motor and shaft-driven 4WD drivetrain with 3-piece propeller shaft. The bathtub frame has an integrated motor cooling duct to enhance motor performance as well. The suspension is made up of TRF416 front and rear uprights, short reversible suspension arms, and the unique front inboard layout, giving fans a highly evolved 4WD chassis. |
) ■Uprights Front and rear uprights are taken from the high-end TRF416 and have 1050 size ball bearings. |
|
) ■Suspension Arms Short reversible suspension arms reduce chassis roll and enable minute settings adjustments. |
|
) ■Rear 2-piece motor cover make exchanging pinion gear a breeze. |
) ■Underbody Integrated cooling duct as well as aluminum motor mount effectively dissipate heat. |
|
) ■Inboard Front Suspension Dampers are acuated via pushrods and rocker arms and the setup enables mounting of low-nose bodies. |
|
) ■Realistic Body Rear section of the cowling is separately molded in order to accurately capture the car's unique form. |
| 【 Specifications 】 ●Length: 435mm､, Width:191mm, Height: 104mm ●Wheelbase: 257mm ●Tread: (Front/Rear) 165mm ●Motor: Type RS540 ●Drivetrain: Shaft-driven 4WD ●Diff Gear: (Front/Rear) Ball diff ●Steering Rod: 3-piece ●Suspension: (Front/Rear) Double wishbone ●Dampers: (Front/Rear) CVA Oil damper mini ●Gear Ratio: 7.09 :1 ●Tire Width/Diameter: (Front/Rear) 24mm/64mm ●Speed Controller: ESC (separately available) |
|
【 Separately Required Items 】 ●2-channel R/C system with ESC ●7.2V battery pack ●Alkaline batteris for transmitter |
| 【 Performance Upgrades 】 |
) ■ITEM 54052 （OP.1052） TB-03 Aluminum Universal Propeller Shaft |
|
) ■ITEM 54056 TB-03 Aluminum Differential Joint Set |
|
) ■ITEM 54057 TB-03 Front One-Way Unit |
|
■TB03 Titanium Screw Set Item No.49499 ※Limited Edition R/C Item These hex head screws weigh only half as much as the kit standard screws and are also made from strong titanium. 【 Set Contents 】 ●Hex Head Countersunk Screw：3×6mm (x2), 3×8mm (x21), 3×10mm (x19), 3×12mm (x8), 3×16mm (x1), 3×23mm (x2) ●Hex Head Button Screw：3×6mm (x7), 3×8mm (x7), 3×10mm (x22), 3×15mm (x2) ⇒Click here to view image. |
| |||||
){kind=link}
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(The information on this page is current as of June 18, 2008.)