Item No：58408
)
Length: 417mm Image shows assembled and painted model kit ※Enlarged Image
| 【 Suzuki's WRC Contender 】 The 2008 WRC season was the first for Suzuki's team as a fully entry, and their SX4 WRC machine got them off to the perfect start with points at both the opening round in Monte Carlo as well as the following round in Sweden. Tamiya has recreated this off-road machine, which is based on a 5-door hatchback, as an assembly kit R/C model. The wide fenders, roof intake, side mirrors and rear wing have all been precisely reproduced, and realism is further enhanced with included LEDs for headlights and tail lights. A full set of team sponsor logo markings gives this car a true-to-life finish. |
| 【 "Enhanced" TT-01 Type E 】 TT-01 Type E chassis features a longitudinally-mounted motor and reliable shaft-driven 4WD drivetrain. In addition to the durable bathtub frame, fiberglass-reinforced upper deck and gear covers increase rigidity. 4-wheel double wishbone suspension and 3-piece steering tie rod offer superb handling while front and rear differentials ensure power transfer efficiency. Rear suspension arms are installed in reverse, reducing the wheelbase by 6mm to 251mm to allow mounting of the SX4 body. The number of parts has achieved a fine balance between ease of assembly and settings adjustability, making it the perfect chassis for beginners. |
) ■Uprights Front and rear uprights have been specifically designed for the TT-01 Type E. |
 |
) ■Steering 3-piece steering tie rod and durable aluminum steering post ensure sharp response. |
|
) ■Damper Stays Damper stays feature 2 damper attachment points and are separately-molded from gear covers. |
) ■Upper Deck Made from fiberglass-reinforced resin, the upper deck helps enhance chassis rigidity. |
|
) ■Transponder Stay Upper deck features a convenient transponder stay, making it easy to take part in R/C races. |
|
) ■Rear View Front and rear light cases are metal plated, enhancing the lifelike look of the LED headlights and taillights. |
| 【 Specifications 】 ●Length: 417mm, Width: 187mm, Height: 143mm ●Wheelbase: 251mm ●Tire Width/Diameter: (Front/Rear) 27／67mm ●Chassis: Bathtub type Drivetrain: Shaft-driven full-time 4WD ●Diff. Gear: Front/Rear 3-bevel diff. ●Steering: 3-piece tie rod ●Suspension: 4-wheel independent double wishbone ●Damper: Front/Rear Friction damper ●Gear Ratio: 8.35:1 ●Motor: Type RS-540 motor included ●Speed Controller: ESC (separately available) |
|
【 Separately Required Items 】 ●2-channel R/C system with ESC ●7.2V battery & charger ●Alkaline batteries for transmitter |
| 【 Performance Upgrades 】 |
) ■ITEM 54025 （OP.1025） TT-01 Type E Ball Bearing Set |
|
) ■ITEM 54026 （OP.1026） TT-01 Aluminum Propeller Shaft & Joint |
|
) ■ITEM 53800 （OP.800） Aluminum Toe-In Rear Uprights (TT-01, TGS) |
|
【 Notice! 】The 6 parts below are not compatible with TT-01 Type E. ITEM 51002 （SP.1002） TT-01 A Parts (Uprights) ITEM 53497 （OP. 497） TT-01 Ball Bearing Set ITEM 53670 （OP. 670） TT-01 Aluminum Racing Steering Set ITEM 53672 （OP. 672） TT-01 Carbon Upper Frame ITEM 53694 （OP. 694） TT-01 Front Stabilizer Set ITEM 53695 （OP. 697） TT-01 Rear Stabilizer Set |
| |||||
Scale Models | Home | On-Line Catalog | R/C Mini 4WD | Dangun Racers | R/C Models
(The information on this page is current as of June 19, 2008.)